High-Density EVA Cushioning to Support Equine Joint Health
Unprotected cold concrete floors in horse stalls and breeding pens cause chronic stress on an animal's joints, hocks, and tendons. Standing for long periods on hard surfaces forces yard owners to use excessive amounts of straw or shavings to absorb impact and block rising frost. Traditional heavy rubber sheets protect the concrete subfloor but offer minimal vertical compression or softness, meaning smaller horses and recovering animals still experience joint fatigue.
Our 12 mat special 24mm EVA cushioned mats provide an advanced orthopedic solution that protects horses from hard floors. Manufactured from a premium high-density EVA foam compound, these lightweight mattresses provide deep compression underneath hooves, redistributing the animal's weight across the stall floor. The thick 24mm barrier provides complete insulation from frozen ground, lowering muscle stiffness and providing an excellent resting space.
Maintain a Clean and Sterile Stable Environment with Inbuilt Drainage
A common issue with low-grade porous stable mats is fluid retention; ammonia, water, and horse urine can seep into the material, creating strong odors, bacterial growth, and respiratory issues. Our premium EVA matting completely solves this problem through its non-porous, urine-proof structural profile. Fluids are blocked at the surface for quick sweeping, while the reverse side features raised drainage areas that guide run-off away toward your floor drains.
This moisture-resistant shield keeps the air dust, spore, and allergy-free for both handlers and livestock. The dense EVA matrix will not swell, curl, or deform when exposed to moisture or disinfectants. For large commercial livery yards looking to refit multiple stalls efficiently, coordinating bulk trade orders through the dedicated supply at Welcome Step ensures matched thickness batches, dependable shock absorption, and cost-effective bulk pricing for full equestrian facilities.
Simple Lightweight Installation and Professional Fitting Guidelines
Unlike massive vulcanized rubber sheets that require multiple people to lift, these lightweight EVA mattresses are easy to handle, carry, and install by a single yard hand. They lay directly over concrete, stone, or timber floors without needing permanent adhesives or fixings. For unique stall corners, the dense compound trims down cleanly with a standard sharp utility knife.
When installing, it is vital to remember that EVA material naturally expands slightly under the weight of a standing horse. To prevent the panels from crowding, always leave a small 1cm to 2cm gap along at least two outer walls; this empty border gives the mats room to expand naturally, preventing them from warping, lifting, or curving at the seams.
Stable Size and Mat Requirements Guide
To help plan your stall layout, please use our quick coverage breakdown for standard configurations:
-
10ft x 8ft Stable: Requires 4 Mats
-
12ft x 10ft Stable: Requires 5 Mats
-
12ft x 12ft Stable: Requires 6 Mats
-
14ft x 12ft Stable: Requires 7 Mats
-
16ft x 12ft Stable: Requires 8 Mats
-
14ft x 14ft Stable: Requires 9 Mats
Frequently Asked Questions
Why choose lightweight EVA mats over standard heavy rubber sheeting?
EVA mats provide much better shock-absorbing cushion and insulation at 24mm thick, and are lightweight enough for one person to move, lift, and clean.
Why do I need to leave a 1cm to 2cm border gap against the stable walls?
EVA foam expands slightly under the weight of heavy horses. Leaving an expansion gap on two sides prevents the mats from pushing together and lifting.
How do the raised areas on the bottom of the mats help?
The raised underside shapes create clear channels that allow urine and water to drain away easily instead of pooling under the flooring.
Is this 24mm EVA cushioned mat bundle completely urine proof?
Yes, the premium compound is entirely non-porous and water-resistant, blocking ammonia and moisture absorption to maintain a healthy stable environment.
What horse size is the 24mm thickness profile best suited for?
We recommend 18mm for small ponies, 24mm for small to medium horses, 34mm for medium breeds, and 44mm for large draught horses.
Can I clean and disinfect these mats with standard yard washes?
Yes, the non-absorbent surface can be quickly scrubbed, sprayed down, or pressure washed with typical stable disinfectants without damaging the material.
Will these foam mattresses crumble or tear under metal horseshoes?
No, our high-quality EVA compound is engineered to resist tearing, splitting, and cracking under daily movement from shod horses.
Do new EVA stable mats arrive with a factory smell or slick surface?
They may have a safe factory release agent from manufacturing. This light sheen washes off quickly with warm water and normal liquid soap.
Can these mats be cut easily to fit around stable doors and posts?
Yes, the dense foam material trims down smoothly using a straight metal edge ruler and a sharp heavy-duty utility knife.
How does this 12-mat special bundle help lower stable running costs?
The excellent 24mm thermal insulation reduces the amount of loose bedding material needed, significantly lowering your ongoing straw and wood shaving costs.
Product Specifications
For estate managers, commercial livery yard owners, and equine veterinary specialists who require exact material data and sizing tolerances, please find our technical specifications below:
Technical Property
Certified Operational Rating
Material Base
Premium High-Density Ethylene-Vinyl Acetate (EVA)
Pack Configuration
12-Mat Special Wholesale Bundle
Mat Dimensions
6ft x 4ft ($1.8\text{m} \times 1.2\text{m}$) Per Individual Mattress
Material Thickness
24mm Structural Depth
Surface Profile
Textured Non-Slip Pattern (Reversible Design)
Base Configuration
Raised Drainage Cross-Channels on Reverse Side
Hygienic Properties
Non-Porous, Urine-Proof, Spore-Free, Allergen-Free
Installation System
Loose-Lay Expansion Layout (Requires 1cm to 2cm Border Gap)
